Page 386 - Hamilton 2020-2021
P. 386

                Smart Lighting Control
Mechanical Button
LIGHTING CONTROL
Control your lighting system with a mechanical button wall plate, available in Hartland, Hartland CFX®, Sheer, Sheer CFX® and Linea CFX® ranges. Any button can be configured for any function with Hamilton’s designer software. Controllers will fit into any single wall box (BS4662) with a minimum depth of 35mm.
• Dim up and down - Power on/off
• 4 - 16 mechanical buttons as standard
• 4 scene recall - more available as bespoke or with handset • Engraved legend
• Bespoke plates available
QUICK AND SIMPLE TO USE
Store scenes at the touch of a button:
1. Adjust the lighting levels using the circuit buttons. A brief press will turn the lights on/off, a prolonged press will raise/lower the light level.
2. Once you’ve selected the desired light level for all four circuits, press and hold down scene button one. The LED will flash five times. Keep your finger on the scene button until the LED stops flashing.
3. Your new scene is now stored. Repeat above to store further scenes on buttons 2,3 and 4. No commissioning work is required.
4. To recall a scene, press the desired scene button. To turn the zone off press the currently selected scene button.
5. To adjust a circuit without changing stored scene simply press or hold desired circuit button.
   INSTALLATION
 For connection of additional controls use CAT5/6 cable wired in parallel. Note: if other dimmer packs are included within the same system, link all with CAT5/6 cable.
86.0mm
   Pre-programmed { recall buttons
To recall a scene press any Scene button, 1-4. The LED will go bright. To turn off simply press any of the scene buttons that are brightly lit.
Press and hold to adjust light levels.
Individual circuits 1-4.
Note: A quick push of individual circuit button turns circuit on or off.
                         V+
CH
1 86.0mm
CL
V-
            1 86.0mm 2
3
4
1 86.0mm 2
3
4
          2 3 4
                Master Wall Plate Slave Wall Plate
You can also add additional wall plates by duplicating the DIP switch setting.
1 2 3 4
1 2 3 4
11 22 33 44
                            386
www.hamilton-litestat.com
SMART LIGHTING
{
86.0mm






















































   384   385   386   387   388